一次在k8s集群中创建实例发现etcd集群状态出现连接失败状况，导致创建实例失败。于是排查了一下原因。
问题来源

下面是etcd集群健康状态：

[root@docker01 ~]# cd /opt/kubernetes/ssl/
[root@docker01 ssl]# /opt/kubernetes/bin/etcdctl
**> --ca-file=ca.pem --cert-file=server.pem --key-file=server-key.pem \

–endpoints=“https://10.0.0.99:2379,https://10.0.0.100:2379,https://10.0.0.111:2379”
cluster-health
member 1bd4d12de986e887 is healthy: got healthy result from https://10.0.0.99:2379
member 45396926a395958b is healthy: got healthy result from https://10.0.0.100:2379
failed to check the health of member c2c5804bd87e2884 on https://10.0.0.111:2379: Get https://10.0.0.111:2379/health: net/http: TLS handshake timeout
member c2c5804bd87e2884 is unreachable: [https://10.0.0.111:2379] are all unreachable
cluster is healthy
[root@docker01 ssl]#
可以明显看到etcd节点03出现问题。
这个时候到节点03上来重启etcd服务如下：

**

1. [root@docker03 ~]# systemctl restart etcd Job for etcd.service
   failed because the control process exited with error code. See
   “systemctl status etcd.service” and “journalctl -xe” for details.
   [root@docker03 ~]# journalctl -xe Mar 24 22:24:32 docker03
   etcd[1895]: setting maximum number of CPUs to 1, total number of
   available CPUs is 1 Mar 24 22:24:32 docker03 etcd[1895]: the
   server is already initialized as member before, starting as etcd
   member… Mar 24 22:24:32 docker03 etcd[1895]: peerTLS: cert =
   /opt/kubernetes/ssl/server.pem, key =
   /opt/kubernetes/ssl/server-key.pem, ca = , trusted-ca =
   /opt/kubernetes/ssl Mar 24 22:24:32 docker03 etcd[1895]: listening
   for peers on https://10.0.0.111:2380 Mar 24 22:24:32 docker03
   etcd[1895]: The scheme of client url http://127.0.0.1:2379 is HTTP
   while peer key/cert files are presented. Ignored key/cert files. Mar
   24 22:24:32 docker03 etcd[1895]: listening for client requests on
   127.0.0.1:2379 Mar 24 22:24:32 docker03 etcd[1895]: listening for client requests on 10.0.0.111:2379 Mar 24 22:24:32 docker03
   etcd[1895]: member c2c5804bd87e2884 has already been bootstrapped
   Mar 24 22:24:32 docker03 systemd[1]: etcd.service: main process
   exited, code=exited, status=1/FAILURE Mar 24 22:24:32 docker03
   systemd[1]: Failed to start Etcd Server. – Subject: Unit
   etcd.service has failed – Defined-By: systemd – Support:
   http://lists.freedesktop.org/mailman/listinfo/systemd-devel –
   – Unit etcd.service has failed. – – The result is failed. Mar 24 22:24:32 docker03 systemd[1]: Unit etcd.service entered
   failed state. Mar 24 22:24:32 docker03 systemd[1]: etcd.service
   failed. Mar 24 22:24:33 docker03 systemd[1]: etcd.service holdoff
   time over, scheduling restart. Mar 24 22:24:33 docker03
   systemd[1]: start request repeated too quickly for etcd.service
   Mar 24 22:24:33 docker03 systemd[1]: Failed to start Etcd Server.
   – Subject: Unit etcd.service has failed – Defined-By: systemd – Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel –
   – Unit etcd.service has failed. – – The result is failed. Mar 24 22:24:33 docker03 systemd[1]: Unit etcd.service entered
   failed state. Mar 24 22:24:33 docker03 systemd[1]: etcd.service
   failed. 并没有成功启动服务，可以看到提示信息：member c2c5804bd87e2884 has already
   been bootstrapped 查看资料说是： One of the member was bootstrapped via
   discovery service. You must remove the previous data-dir to clean
   up the member information. Or the member will ignore the new
   configuration and start with the old configuration. That is why
   you see the mismatch. 大概意思： 其中一个成员是通过discovery
   service引导的。必须删除以前的数据目录来清理成员信息。否则成员将忽略新配置，使用旧配置。这就是为什么你看到了不匹配。
   看到了这里，问题所在也就很明确了，启动失败的原因在于data-dir
   （/var/lib/etcd/default.etcd）中记录的信息与 etcd启动的选项所标识的信息不太匹配造成的。 问题解决
   第一种方式我们可以通过修改启动参数解决这类错误。既然 data-dir
   中已经记录信息，我们就没必要在启动项中加入多于配置。具体修改–initial-cluster-state参数：

**

[root@docker03 ~]# cat /usr/lib/systemd/system/etcd.service
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=-/opt/kubernetes/cfg/etcd
ExecStart=/opt/kubernetes/bin/etcd
–name=KaTeX parse error: Expected 'EOF', got '\ ' at position 13: {ETCD_NAME} \̲ ̲--data-dir={ETCD_DATA_DIR}
–listen-peer-urls=KaTeX parse error: Expected 'EOF', got '\ ' at position 25: …TEN_PEER_URLS} \̲ ̲--listen-client…{ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379
–advertise-client-urls=KaTeX parse error: Expected 'EOF', got '\ ' at position 30: …E_CLIENT_URLS} \̲ ̲--initial-adver…{ETCD_INITIAL_ADVERTISE_PEER_URLS}
–initial-cluster=KaTeX parse error: Expected 'EOF', got '\ ' at position 24: …ITIAL_CLUSTER} \̲ ̲--initial-clust…{ETCD_INITIAL_CLUSTER}
–initial-cluster-state=existing \ # 将new这个参数修改成existing，启动正常！
–cert-file=/opt/kubernetes/ssl/server.pem
–key-file=/opt/kubernetes/ssl/server-key.pem
–peer-cert-file=/opt/kubernetes/ssl/server.pem
–peer-key-file=/opt/kubernetes/ssl/server-key.pem
–trusted-ca-file=/opt/kubernetes/ssl/ca.pem
–peer-trusted-ca-file=/opt/kubernetes/ssl/ca.pem
Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
我们将 --initial-cluster-state=new 修改成 --initial-cluster-state=existing，再次重新启动就ok了。
第二种方式删除所有etcd节点的 data-dir 文件（不删也行），重启各个节点的etcd服务，这个时候，每个节点的data-dir的数据都会被更新，就不会有以上故障了。
第三种方式是复制其他节点的data-dir中的内容，以此为基础上以 --force-new-cluster 的形式强行拉起一个，然后以添加新成员的方式恢复这个集群。
这是目前的几种解决办法**